Drawing test - Autocad

                           Here is a Drawing Tutorial

Level : Beginner
            
                                          Click the image to enlarge





Follow the blog to get more updates

Learn PRO-E faster and easier. To know more click here

DRAWING TEST - AUTOCAD

                         Here is a Drawing Tutorial

Level: BEGINEER


                
                                   Click the image to enlarge




Follow the blog to get more updates

Learn PRO-E faster and easier. To know more click here

AUTOCAD MCQ'S

                                  Here is Autocad MCQ'S

Source: AC 2007 ALF YARWOOD



1. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin
b) li
(c) l
(d) ln.
2. When the F6 key of the keyboard is pressed, the following facility is toggled on/off:
(a) Snap
(b) Ortho
(c) DUCS
(d) DYN.
3. The key F9 toggles on/off:
(a) Snap
(b) Ortho
(c) Grid
(d) DYN.
4. When entering absolute coordinate numbers at the command line, the coordinates are preceded by:
(a) The letter a
(b) The symbol @
(c) The letters ab
(d) There is no need to enter anything in front of the coordinate numbers
5. The command line abbreviation for the Circle tool is:
(a) cir
(b) c
(c) ci
(d) cl.
6. What are the differences between outlines drawn using the Line tool and those drawn using the Polyline
tool? Outlines from the Line tool form separate objects. Those from the Polyline tool form single
objects.
Chapter 3
1. The Arc tool can be called by entering the following abbreviation at the command line:
(a) ar
(b) a
(c) ac;
(d) There is no abbreviation. The name arc must be entered in full.
2. The set variable PELLIPSE can be set to either 0 or 1 when it allows the following actions:
(a) When set to 0 the Edit Polyline tool to be used on ellipses
(b) When set to 1 the Edit Polyline tool to be used on ellipses
(c) When set to 0 it allows ellipses to be drawn with the major axis at any angle
(d) When set to 0 ellipses become polylines.
3. When saving an AutoCAD 2007 drawing it is filed with the extension:
(a) *.drw
(b) *.dwg
(c) *.dwt
(d) *dg.
Solutions accompanying Introduction to AutoCAD 2007 by Alf Yarwood, ISBN 075081453. © Alf Yarwood.
All rights reserved.
4. The Dynamic Input (DYN) system can be toggled on/off by pressing which key of the keyboard:
(a) F6
(b) F7
(c).F12
(d) F3.
5. What is the function of entering commandline at the keyboard:
(a). It enables the command line to be used for entering command
(b). It brings back the command palette when it has been hidden
(c). It can only be used when DYN is set on to allow Dynamic Input to work
(d). It places the command palette at the bottom of the screen.
6. The Polyline Edit tool can only be used when working with polylines:
(a) True
(b) False.




Follow the blog to get ,more upates

Learn AC faster and easier. To know more click here

AUTOCAD MCQ'S

                        Here are some Autocad MCQ'S

Source : AC 2007 Alf Yarwood


1. The toolbar at the top of the AutoCAD 2007 window is:
(a) The Draw toolbar
(b) The Modify toolbar
(c) The Standard toolbar
(d) The Properties toolbar
2. The DesignCenter palette can be opened from the:
(a) Layer toolbar
(b) Properties toolbar
(c) Modify toolbar
(d) Standard toolbar
3. Press the F9 key of the keyboard switches:
(a) Grid on/off
(b) Snap on/off
(c) Ortho on/off
(d) Osnap on/off
4. In the coordinate system of AutoCAD 2007:
(a) Positive x figures are to the left
(b) Positive x figures are to the right
(c) Positive x figures are in the direction vertically upwards
(d) Positive x figures are in the direction vertically downwards.
5. Drawing templates are held in files with the file extension:
(a) *.dwt
(b) -*.dwg
(c) *.bmp
(d) *.dwr.
6. A left-click on a name in a drop-down menu showing three dots (...) appearing after the name means that:
(a) A command name will appear at the command line
(b) A dialog will appear on screen
(c) A sub-menu will appear
(d) A tool will be activated.
7. AutoCAD 2007 can be opened with:
(a) A left-click on the AutoCAD 2007 shortcut icon in the Windows desktop
(b) By typing acad at the keyboard
(c) Automatically when the computer is switched on
(d) By selecting from a list which appears on screen when the computer is switched on.
8. The term dragging means:
(a) Left-click on an item and the item can be moved to another position on screen
(b) Double-click on an item. The item can then be moved to another point on screen;
(c) Holding down the left-hand button of the mouse on an item can be moved to another point on screen
(d) Press the right-hand button of the mouse. This allows an item to be moved anywhere on screen.
9. An arrow appearing after a name in a drop-down menu means that:
(a) A command name will appear at the command line
(b) A dialog will appear on screen
(c) A sub-menu will appear
(d) A tool will be activated.


Post the answers in the comment box.

Follow the blog to get more updates


Learn Autocad faster and easier. To know more click here

DRAWING TEST - AUTO CAD

                      Here is a Drawing test on Autocad

LEVEL : BEGINEER

                                               Post your .dwg file in the comment box



                                           
                                                        Click the image to enlarge


                                                    Follow the blog to get more updates

                               Learn AUTOCAD faster and easier. To know more Click here

DRAWING TEST - JEEP MODEL

                Here is a Jeep model in 2d. Draft it in Auto cad

SOURCE : http://tinyurl.com/pjgfypn
                
                                                            Click the image to enlarge


                                              Follow the blog to get more updates.

                       Learn AUTOCAD faster and easier. To know more Click here

AUTOCAD ISOMETRIC DRAWING TEST

                        Here is a isometic drawing test.


Submit your .dwg files in the comment box
                             
                                                     Click the image to enlarge

                                               Follow the Blog to get more updates

                             Learn Auto cad faster and easier. To know more Click here

AUTOCAD TUTORIAL OF THE DAY - QSELECT

                           AUTOCAD TUTORIAL

                                      Quick Select

	Tools -Quick Select
Keyboard	QSELECT

Quick Select made it's debut in AutoCAD 2000 and is designed to help users make complex selections quickly. It is also designed to be a simplified version of the Filter command, detailed below. Quick Select allows you to make selections based upon object properties. Say, for example, that you needed to select all circles on a layer called Water. Quick Select can help you do this. If you look at the dialogue box below, you will see that there are a number of parameters to set. To select all circles on the Water layer, you would make the settings shown in the dialogue box.
                                                     
                                                            Click the image to enlarge

                    Let's have a closer look at the selection parameters in the Quick Select dialogue box. As with all dialogue boxes, it is important to move methodically through the various parameters. It is even more important in this case because the choices you make at the beginning of the process will affect the options available to you later. Start at the top of the dialogue with "Apply to" and work your way down.

1. The "Apply to" parameter can be used to cause the selection to be made from the entire drawing or from a selected part of the drawing. Use the Select objects button to create a selection set from which your more detailed selection will be made.
2. The "Object type" parameter allows you to select objects such as circles, lines etc. The drop-down list contains an inventory of all the different object types in the current drawing. If your selection is to be made from more that one object type, select "Multiple". Note that this parameter only allows you to select one object type or all objects. This is one limitation of Quick Select, although you can append selections to create compound selection sets, see below. However, if you want to make complex selections based upon multiple selection criteria, you may be better of using the more advanced features of the Filter command described below.
3. The "Properties" parameter allows you to specify which paricular property of an object type to apply to the selection. For example, circle properties include radius, diameter and circumference in addition to the standard object properties like layer and colour. So you could select all circles with with a particular radius or all circles on a particular layer.
4. The "Operator" parameter determines how the value is applied to the selection. For example, using the equals option with a circle radius and a value set to 24 would mean all circles with a radius of 24 are selected. However, other options available for the operator parameter allow you to select all circles of radius less that 24 or greater than 24 or even all circles except those with a radius of 24. Pretty amazing huh?
5. The "Value" parameter is used to specify the value of the property you have already chosen. For example, if you had specified Circle and Radius as your object type and property, you might enter "24" as a value. All circles with a radius of 24 would be selected. Or if you had specified Circle and Layer as your object type and property, you could select a layer name such as "Water". In this case, all circles on the layer called Water would be selected.

Finally, using the "How to apply" box, you have the option to have the selected objects either included or excluded from the new selection set. In addition, you can also have this selection appended to the current selection set. The "Append to current selection set" option is particularly useful because it means that you can use Quick Select repeatedly to build up compound selections. For example, you could use Quick Select to select all blue circles and then use it again to select all blue lines. Appending the blue lines selection to the blue circles selection would mean that you end up with a selection of all blue lines and circles.

As you can see, this is a very powerful tool and takes a little time to get used to. However, it is well worth making the effort as it can drastically improve your drawing efficiency. For your convenience, Quick Select is also available from the right-click context menu.



Follow the blog to learn more

Learn AUTOCAD faster and easier. To know more Click here

AUTOCAD DRAWING TEST

                                        Here is a drawing test in AUTO CAD

                                             

Try to draft it as seen in the given image in Auto cad
 
                          

                                                Click the image to enlarge


Post your .dwg files in the comment box.

Follow the blog to get more updates.

Learn Auto Cad faster and easier. To know more Click here

TRENDS IN AUTOCAD

                                             LATEST TREND IN AUTO CAD

SOURCE : FINANCIAL EXPRESS (http://tinyurl.com/ng2vksk)

Auto desk is a brand synonymous to computer-aided design (CAD) software. Quite a large number of people—from design professionals, engineers and architects to digital artists and students—have used Autodesk software at some point of time to unlock their creativity and solve important challenges. However, the San Rafael, California headquartered firm wants to change that perception. Autodesk senior vice-president of worldwide sales and services Steven Blum stresses that the company actually has a much broader portfolio with industry specific suites. Prior to this position, Blum was senior vice-president of Americas sales at Autodesk. Under his leadership, revenue in the Americas more than doubled to over $700 million. Bullish on India, the Autodesk sales and services head tells Heena Jhingan that the introduction of mobile devices into the construction industry is transforming the way that projects are built and managed. Excerpts:

What are your efforts to re-create a brand beyond the CAD image?
We actually have a much broader portfolio with industry specific suites. I don’t think that is well understood by a lot of people in the industry. Autodesk is much more than AutoCAD, the core design, drafting and modelling software application. We focus on manufacturing, architecture, engineering and construction space. Most of the people know us for the architecture part, however we have been building our portfolio around engineering and construction bit as well.

Construction has become a very important part of our over all portfolio. Our solution is addressing the needs that construction industry globally has had for many years, but did not take the advantage of technology because it wasn’t being presented to solve their problems and we are changing that. We also service the manufacturing and automotive industry. Media and entertainment is another part of the business that a lot of people don’t know us for. However, that is changing. For example, our product Revit is now an industry standard for building information modelling (BIM). In fact BIM is the centre of all our AEC (architecture, engineering and construction) business efforts. We see BIM key to discussions with our customers in most markets, including India.



Follow the Blog to get more updates.

Learn AUTO CAD faster and easier. To know more Click here

TRICKY BRAINY QUESTIONS

Ha we have seen lots of questions and diagrams in Autocad. These questions won't allow you pass in the INTERVIEW. Here are some brainy tricky question to refresh you from AUTOCAD



Let's Go brainy


SOURCE :  http://tinyurl.com/onxubaa

1.Based on what you know about us, what could we be doing more efficiently?

RAMESH SHANKAR, EVP and cluster HR head, South Asia at Siemens says he would play it safe while answering it. One could say it's not possible to say much as an outsider and what he knows is public knowledge. Another way would be to talk about new ideas that the company could look at and how the candidate can help implement them.

2.Rate yourself on a scale of 1-10.

A majority of candidates tend to go with a safe answer, rating themselves typically between 6 and 8. Some, who are in frontline sales etc, rate themselves higher at 9-10 . Their explanation is they have been at the top of their team and have consistently been overachieving. "To them, we ask a follow-up question: In order for you to go to the next level, what are the areas you need to develop?" says Madhavi Lall, regional head-HR , India & South Asia, at Standard Chartered Bank.

3.Did you think of leaving your current position earlier? If so, what has made you stay till now?

An impressive answer here would be: "I'm not actively looking out but, am open to exploratory conversations on opportunities which can help me grow my career." There are many who are quite direct as well, saying that they don't get along with their line manager/boss.

4.How would you evaluate your present company?

Managers say that candidates should not complain about the their current company. "Focus on your strengths and weaknesses," says Shankar. You could talk about why it is not working out for you, and why you are looking to move on.

5.What can you do to take your boss's job?

Managers rarely get a good answer to this one. One that would score with them would be something like "to get a job at the next level (consciously avoiding using the phrase 'boss' job' ), I'd consistently outshine in my current role while continuing to build my skillsets." "Responses which we usually get are "I don't want to do my boss's job" while there are people who say: "I think I'm better" . To the latter we ask the followup question: Then, why haven't they taken you for the next level yet?" says Lall.

6.If God was outside the interview room, what are the three wishes you would ask from him?

Prashant Deo Singh Head, HR & general affairs, Panasonic India, asked this question to a few candidates . "There are some people who come up with selfish responses that only concern them; others have larger goals like doing something for others. We try to evaluate the responses to gauge a candidate's philosophy in life and to see if it matches with that of the company," he says.

7.The Interviewer could just pick up an object, for instance a pen, and ask, how would you market it?

It shows how fast the person can think on his feet. The question is essentially targeted at a sales or marketing professional . Deo Singh says the really good candidates immediately start a selling spiel when faced with this question.

8.What is the wildest thing that you have done in life?

This question is asked to test the determination, passion and commitment of a person, according to Ashutosh Telang, executive vicepresident & head, HR at Marico. Responses may vary: I had a fear of heights but I overcame it by bungeejumping . Or someone who has a love for travelling might say that he/she took a break for three months and backpacked through the country. "Of course, you can also get some ridiculous responses where the person is clearly fibbing," says Telang.

9.What is your most embarrassing moment? How did you deal with it?

HR managers feel this question helps in understanding a candidate's ability to deal with delicate situations. For instance , this might showcase a candidate's ability to convert a potential crisis into an opportunity, they feel. The answer could be based on a personal or a professional moment but the emphasis should be on what they learnt and how they converted it into an opportunity.

For instance, an anecdote like how a candidate might have been reprimanded for not wearing the correct uniform while at school and how that taught him the importance of discipline in life.

10.Have you ever been approached to do something unethical at work and what did you do?

That's the trickiest question. Should you be honest? Shankar feels the candidate should have the courage to be honest. "It is okay to admit to making a mistake if the reasons given are substantial, rather than faking it. The interviewer would be quick to catch the lie otherwise," he says.

Follow the blog to get more updates.

 Learn AUTOCAD faster and easier .To know more Click here

DRAWING TEST -- CAR

Design the given drawing in cadd

DESIGN NAME : CAR

SOURCE : http://tinyurl.com/o8e4e66

                                                               Click the image to enlarge


Follow the blog to get more updates

Learn AUTOCAD faster and easier.To know more Click here

DRAWING TEST - PLUMBER BLOCK

                                         Here is a Plumber block drawing test


LEVEL : INTERMEDIATE

Follow the blog to get more updates

Learn AUTOCAD faster and easier. Click here to know more....

ISOMETRIC DRAWING TEST

                                                 Here is a Isometric Drawing test.

Draw the given drawing in Autocad and submit your .dwg file in the comment box

 

Click the image to enlarge it.

Learn Autocad faster and easier.

To know more click here

HOW FIRST JOB INTERVIEW QUESTIONS WILL BE?

Here are some interview questions in different phases. See through it , handle the interview easily.

SOURCE: http://tinyurl.com/nzv4l4f

Autocad Drafter interview questions samples for First job interview:


- How do you let subordinates know what you expect of them?
- What five words would be describe you as Autocad Drafter?
- What do you believe are your key strengths?
- What have you learned from mistakes on the Autocad Drafter job?
- How do you keep yourself and your teammates motivated?
- Why did you leave your last job.
- Who has impacted you most in your career and how?




Autocad Drafter interview questions examples for Second interview:
- Tell me about your proudest achievement.
- What is your expected salary?
- What are your expectations regarding promotions and salary increases?
- Do your skills match Autocad Drafter job or another job more closely?
- How do you stimulate the sharing of further information?
- Have you ever had to deal with conflicting deadlines?
- Describe a difficult work situation and how you overcame it.


Typical Autocad Drafter interview questions for Phone interview:
- Give an example of situations when your leadership skills were needed.
- What would you say are your strong points?
- What assignment was too difficult for you?
- If you were interviewing someone for Autocad Drafter position, what traits would you look for?
- How did you handle meeting a tight deadline?
- How would you decide on your objectives?
- What changes did you develop at your most recent employer?



Autocad Drafter interview questions for online Video Conferencing interview:
- Do you think that your school prepared for practical working tasks in a real company?
- How do you maintain a positive discussion?
- Give me an example that best describes your organizational skills.
- Tell about a Autocad Drafter training program that you have developed.
- Why are you the best person for this Autocad Drafter job?
- What type of salary are you looking for?


Example of Autocad Drafter internship interview questions:
- How well did your college experience prepare you for this Autocad Drafter internship?



Follow the blog to get more updates

Learn Autocad faster and easier. To know more Click here

DWAWING TEST

     COMPLETE THE GIVEN DRAWING TEST IN THE AUTOCAD ISOMETRIC TRAP

SOURCE: INTERNET
 
Draw the given drawing as such in the Auto Cad.?

   

                         

Put your completed autocad DWG file in the comment box.


Learn Autocad faster and easier.To know more click here

AUTOCAD INTERVIEW QUESTIONS CONT...

                             AutoCAD Interview Questions And Answers

           AutoCAD Job Interview Preparation Guide.

 

 

1. To reverse the UNDO command the correct entry is?

Answer:-

(a) REDO

(b) REDRAW

(c) Esc

(d) U

2. Which of the following statements is true for AutoCad?

Answer:-

(a) ZOOM ALL will reach beyond the drawing limits if an object is there.

(b) ZOOM ALL only reaches out to the drawing limits.

(c) There is not real difference between ZOOM ALL and ZOOM E.

(d) ZOOM ALL makes all objects visible irrespective of the layer

visibility state.

 

 

3. The command to scale a paper space viewport to half the<br />

drawn size is?

Answer:-

(a) Zoom 0.5x

(b) Zoom 1/2x

(c) Zoom 2xp

(d) zoom 0.5xp

 

 

4. Which one of the following options of the UNDO command allows the undo facility to be disabled?

Answer:-

(a) AUTO

(b) CONTROL

(c) END

(d) GROUP

 

5. Which one of the following commands forces AutoCAD to<br />

revise the entire drawing taking into account the effect of<br />

changes within the system?

Answer:-

(a) CHANGE

(b) REDO

(c) REDRAW

(d) REGEN

 

 

6. Which one of the following commands allows simultaneous<br />

pan and zoom?

Answer:-

(a) ZOOM DYNAMIC

(b) ZOOM EXTENTS

(c) ZOOM CENTER

(d) ZOOM PAN

 

7. Which one of the following commands CANNOT be undone?

Answer:-

(a) XREF

(b) SETVAR

(c) SAVE

(d) LIST

 

8. The MAXIMUM number of commands whose effect can be undone by the UNDO command is?

Answer:-

(a) 256

(b) 1000

(c) all the command issued since the drawing was first created

(d) all commands issued since the drawing was last loaded into

the drawing editor

 

 

9. Which one of the following commands would be used to limit the movement of the cursor to specified<br />

increments?

Answer:-

(a) AXIS

(b) GRID

(c) ORTHO

(d) SNAP

 

10. Which one of the following commands can be used to turn the grid through 45 degrees ?

Answer:-

(a) AXIS

(b) GRID

(c) ROTATE

(d) UCS

 

 

11.When producing a drawing of a site plan measuring 300m x 275m dimensions should be entered to a<br />

scale of?

Answer:-

(a) 1:1

(b) 1:10

(c) 1:100

(d) 1:1000

12. Which one of the following BEST defines a \&quot;prototype\&quot; or \&quot;template\&quot; drawing?

Answer:-

(a) the drawing which is currently being edited by AutoCAD

(b) a drawing used to store a library of standard symbols

(c) a means of setting the initial drawing environment for new drawings

(d) a file which holds details of the display, digitiser, and plotters that AutoCAD is currently configured 

Follow the blog to know more

To Learn Auto cad Faster and easier click here

 

 

 

AUTOCAD INTERVIEW QUESTIONS FOR FRESHERS PART - 2

 INTERVIEW QUESTIONS AND ANSWERS FOR FRESHERS PART - 2

 

6. What is the use of variants in AutoCAD?

- AutoCAD uses lots of variants including the releases that provide capabilities to build an application.

- The 3D capability that is being provided by the AutoCAD gives fewer rises to the releases of the applications.

- Variants are used to increase the variations present in the application or the package used in particular program.

- AutoCAD provides variants that help in creation, visualizing and rendering of the 3D models that provide the 3D printing as well.

- Variants provide a way to use different functionalities of the function in the application and execute it according to the needs.

8. What are the differences present in the software’s features?

The difference in the software’s features is shown as:

- 3D Capabilities: this is a way through which AutoCAD can view the overall progress of creation, visualization and rendering of the 3D objects.

- Network Licensing: is being provided by the AutoCAD to be used for the multiple machines over the network.

- Customization: is another feature of AutoCAD that doesn’t support LISP, ARX, and VBA for the customization part.

- Management and automation capabilities: is being provided with the management and automate the whole process of creation.

9.  What are the features involved with the AutoCAD WS?


- AutoCAD is a platform that provides Mobile Apps (iOS) to be created by providing certain options for view, edit and share.

- The user can easily share the applications wherever they go on fly and it makes creating application less time consuming.

- The applications can be downloaded and installed from many other places that require licensing for the mobile applications.

- The users can save the file in whichever way they want and the application can run on any platform.

- AutoCAD applications provide a way to let the user share information on cloud and use the technology to enhance more features.

10.  What are the different ports used in different OS?


- AutoCAD doesn’t have major improvements and some changes can be made to improve the capabilities of it.

- It requires the improvements to be made on the ports so to provide the easy accessibility to the applications and devices.

- The changes have been made to suit the environment and it included:

- Canvas control: this is being done in an increased manner and it controls the area that is being defined by the canvas.

- Associated arrays: this provides the arrays that are being associated with other arrays or other parts.

- 3D model manipulation: that is being done by the tools used in the operating systems and allows easy portability of the application.

10. What is the procedure to create user interface?


- The user interface can be created by using the command prompts to draw the plots and dialog boxes.

- The displaying of the dialog boxes can be seen by the use of PLOT command and the external database (ASE) commands.

- Setting of CMDDIA to 1 takes place that enables the dialog boxes to run the command and enter the spaces of use.

- The user interface creation also requires the command line to display the entire file so that it can be easily customized or edited.


 Follow the blog to get more updates

Learn Auto Cad faster with cheaper rate.For more Info Click here

AUTOCAD INTERVIEW QUESTIONS FOR FRESHERS PART - 1

 INTERVIEW QUESTIONS FOR FRESHERS PART - 1

 

1. What is the purpose of Auto Cad software?

- Auto CAD software provides the design and the shape for the products that needs to be created.

- It provides flexible and user friendly features with the tools to design the applications and document the workflows.

- This involves aggregate and import models for the formats and usually allows the design to get created without any change in source model.

- It provides tools to provide the formats by detailed designing the layouts and drawings using the views automatically.

- It also has the provision to create detailed design layouts and views can be drawn automatically using the source model.

2. What are the uses of Auto CAD?

- AutoCAD software is used to draw and design the documents and the applications with easy customization options.

- AutoCAD provides a platform to be used by professionals to create the designs and 3D models.

- It allows the creation of the professional technical drawings and conceptual designs used for representation of the logics.

- It allows the drafter to provide the finishing touches and designing with the detailing and linking to the online data.

- It provides suppliers or operational professionals to review the drawings and modify it according to the requirements.


3. What is the main purpose of AutoCAD?


- AutoCAD is used to create the computer aided designs or software applications including drafting.

- AutoCAD develops the application in both the 2D and 3D formats and provide the information to the application.

- AutoCAD provides tools to design the softwares used in the industry, architectures and project management.

- It provides an easy way to design the software with the designs and architect it according to the need.


4. What are the file formats used in design?


- There is a use of native format like .dwg for the AutoCAD and it provides an interchangeable format.

- The file format that is interchangeable has the extension as DXF and it provides the data operability.

- AutoCAD includes the .dwg format and provide the support as well. It provides a way to use the files that are active.

- It provides a way to estimate the total number of active .dwg files that can be made in collaboration with other files.

- It provides languages that can be used and the localization part of the software can be modified to meet the requirements.

5. What is the function of vertical integration?

- AutoCAD uses the vertical integration program to enhance the architectural designing of 3D objects.

- The 3D objects can include walls and other things that are associated with the data having intelligence and association with the simple objects like lines and circles.

- The data is programmed such that it represents only the architectural products and the extracted files.

- The information for the data and the actions on the like modifies and creates the relationship of an object.

- It consists of the tools that allow the estimation and other objects related representation in the 2D drawings.

- The elevations and sections used as a 3D architectural model specifies the standard calculations used in creating applications.

more questions following up

Follow the blog to get more updates

Learn Auto Cad faster with cheaper rate.For more Info Click here

DRAWING TEST

TODAY'S DRAWING TEST -  1

SEE THE BELOW IMAGE AND DO IT IN AUTOCAD

UPLOAD THE AUTOCAD FILE IN .DWG FORMAT IN THE COMMENT BOX TO GET EXITING GIFTS

ANY HUMAN BEING IN THIS PLANT CAN PARTICIPATE IN THIS QUIZ

 

 Watch here for more posts ...

To learn CAD/CAM PDS PDMS PIPING SUBJECTS IN CHEAPER COST CLICK HERE